How to Make a Whistle From Elderwood

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Go out and find yourself a fine elder.

Cut a piece of elderwood, 1,5cm thick, about 20cm long. It's not important what kind of wood as long as it is hard.

Get rid of the soft inside of the elderwood, except for about 5cm at the end. So your whistle isn't fully open.

Cut a V shaped form in your whistle. 3cm from the front.

Cut the other wood as shown on this picture. Make it exactly as thick so it fits nicely the inside of your whistle.

Put the piece you just cut in the front of your whistle, it's ok if you can see it appear through the v shaped hole.

Optionalmake a small hole in the bottom of your whistle so you can change the tone.

Watch the video: Incredible Bird Whistle using Salami! How to make it

Previous Article

How to make a chocolate chip cookie in a mug

Next Article

How to Use Your Voice to Get Things Done on iPhone 3GS/4